Multifunction Calibrators
MasterCal 990
HART Communicator
The MasterCal 990 Hart Communicator is a
precision, multi-function
documenting calibrator
that will calibrate
virtually any process
instrument you have
thermocouples, RTDs,
Ohms, Voltage, current,
pressure, Etc...
|
DMC-1410 Documenting
Multifunction Calibrator
The DMC-1410 Documenting
Multi Function Process
Calibrator fully documents
all calibrations associated
with fixed installation and
laboratory instruments.
The DMC-1410 Calibrator requires no special software and includes a tough, rubber boot.
|
MC-1210
Multifunction Calibrator
The MC-1210 Multifunction
Calibrator provides the functions and accuracy associated with fixed-installations, laboratory instruments, and has everything needed for virtually any calibration task.
|
MC1010
Process Calibrator
The MC-1010 Process
Calibrator provides high
accuracy calibration,
common DMM functions
including read and source thermocouples, RTDs, Ohms, current, pressure, frequency and test continuity.
|
|
Pressure Calibrators
|
|
BetaGauge 311A/321A Temp/Pressure Calibrator
The temperature pressure
calibrator provides pressure measurement flexibility over any competitive unit. It provides 0.025% FS accuracy on both internal,
isolated and stainless steel pressure sensors.
|
BetaGauge 301 Single
Sensor Pressure Calibrator
The Single Sensor Pressure Calibrator is a general purpose value oriented pressure calibrator. With one internal pressure range and an available adapter for external BetaPort-P pressure modules.
|
BetaGauge II Modular
Pressure Calibrator
The Modular Pressure
Calibrator has a typical
pressure accuracy of 0.025% fullscale and an electrical accuracy of ± 0.01%. Intrinsically safe; Class 1, Division 2, Groups A, B, C, and D
|
|
|
BetaGauge PI-PRO
Pressure Calibration Gauge
The pressure calibration gauge combines the accuracy of digital technology with the simplicity of an analog gauge, and achieves performance, ease-of-use, and rich feature set.
|
DPC-30 Digital
Pressure Calibrator
The digital pressure calibrator is a highly accurate, digital calibrator for pneumatic field instrumentation, including valve actuators, P/I transmitters, controllers,
gauges, switches, and recorders.
|
T-140
Pressure Manometer
The pressure manometer is designed to give technicians
the laboratory-grade
accuracy in a rugged,
easy-to-use instrument.
|
Digital Pressure Modules
The Pressure Modules offers 25 standard pressure
modules, covering gauge, vacuum, absolute, compound, and differential
measurements.
|
MECP100 Pneumatic
Hand Pump, 100PSI
Combined with one of the
pressure calibrators, the
pump makes a complete
Pneumatic/Vacuum
Calibration System for
low pressure applications.
This vacuum pump provides a source of air pressure, 0-100 psi.
|
MECP500 Pneumatic
Hand Pump, 500PSI
The pressure pump is
completely assembled and ready to connect to the pressure device to be calibrated. 0-600 psi /vacuum 0-28” Hg. Also available in kit format with case, tubing and fittings.
|
MECP10K Hydraulic Hand
Pump, 10,000PSI
This Hand Pump provides
a hydraulic pressure source from 0 - 10,000 psi. A wide variety of pressure media may be used, but distilled water is the preferred fluid.
|
|
Electrical Calibrators
LC-100
Current Loop Calibrator
The Current Loop Calibrator
an accuracy of 0.015% and a 0.001 mA resolution.
The loop calibrator can simulate, power, and measure two-wire transmitters. With automatic Step and Ramp functions, the precision
loop calibrator also enables remote calibration of
4-20mA devices.
|
IVC-222HPII
Voltage Current Calibrator
The Voltage/Current
Calibrator is a general
purpose current and voltage source that can be used in engineering, manufacturing, test, and process control
application. It combines
both digital and analog
circuitry to achieve its rated specifications in a small, reliable package.
|
MS-420
Loop Calibrator
The Loop Calibrator is a multi-purpose process loop tool that offers high accuracy in an ultra-small, rugged package. A single
pushbutton selects one
of five current outputs
(4, 8, 12, 16 or 20 mA), which can drive up to 300 Ohms, or can act as a
2-wire simulator with an external loop power supply of up to 30 VDC.
|
|
|
|
