Portable Tachometers, Panel Tachometers, Recording Tachometers from Monarch Instrument

Portable Tachometer: PLT200 Pocket Laser Tach
PLT200 is a digital, battery-powered portable optical tachometer, which operates up to 25 feet* from a reflective target using a laser light source. The ergonomic design allows safe, direct line-of-sight viewing of both the target and the display at the same time, while providing a non-slip rubber surface for single hand operation.

Portable Tachometer: PT99 Pocket Tach
Pocket Tach 99 is a digital, battery-powered portable non-contact optical tachometer (red LED), which operates up to 36 inches from a reflective tape target using an LED light source. The ergonomic design allows safe, direct line-of-sight viewing of both the rotating target and the display at the same time, while providing a no-slip rubber surface for single hand operation.

Portable Tachometers: Phasar Laser
The Monarch PHASAR-TACH combines the accuracy and safety of a non-contact optical Tachometer with the convenience and ease of operation of a pistol grip instrument. Simply aim the Tachometer at a reflective target on the rotating object, squeeze the trigger, and read the RPM.

The ACT-1B Panel Tachometer can be factory configured to meet your specifications or user configured on site with the optional USB Programming Cable and Software

The ACT-3X Panel Tachometer is a powerful NIST calibrated fully programmable tachometer and totalizer. It accepts inputs from all Monarch speed sensors or from any standard TTL generating device.

F2A1X Frequency to Analog Panel Tachometer

The F2A1X Frequency to Analog module converts a frequency input signal into a proportional analog voltage (0-5Vdc) or current (4-20mAdc) output. The output signal is electrically isolated from input signal and input power source effectively eliminating troublesome ground loops. The input signal can be supplied from a Monarch sensor (measuring RPM for example) or any source of digital signal not exceeding 12 volts. The F2A1X is factory preprogrammed with the full scale output and input scale factor of your choice. These settings are also user configurable with the optional USB programming cable and PM Remote Software. PM Remote Software also displays data in real-time and allows data to be stored directly to Microsoft Excel™. The F2A1X requires 12-24Vdc input power.

Tachometers, Strobes & Sensors

DataChart® DC1250 2 Channel Paperless Recorder
A maximum sample storage rate of 100 samples per second can be set for both channels allowing for capture of short duration process signals anomalies. CompactFlash™ cards up to 2 Gigabyte size can be used allowing many data points to be stored over long periods of time.

With intuitive operation, flexible input configuration and large memory capability, the DataChart 1250 is a powerful, compact digital recorder.

Need to Data Log RPM?

Instrument and Sensor Compatibility Chart