Partlow MRC 5000 Circular Chart Recorders
|
The straightforwardness of the Partlow MRC 5000 Circular Chart Recorders is immediately evident just by looking at the unit’s face. The operator inter-face, a four-digit display with three-button keypad, is made for simple daily operation and easy configuration. A clear prompting scheme provides rapid access to all configuration and operation data. The operator interface also provides access to test and calibration facilities with a convenient dual function MODE switch. As if configuring the Partlow MRC 5000 Circular Chart Recorders wasn’t easy enough already, there’s also an optional Configurator port for ultimate programming ease. Using the optional PC program, parameters can be modified, saved, and downloaded in seconds. A quick look inside the casing and at the chart itself also speaks to the straightforward, functional design of the Partlow MRC 5000 Circular Chart Recorders. You will find just one jumper to configure each port! The two pens, each with configurable spans, are positioned smoothly without any slidewire feedback; this simplifies design and improves reliability. In addition, the 10” chart rotates at the speeds you select. Finding a place to install this recorder is
easy, with its com-pact 2.5” panel depth and short 1.3”
protrusion from the front panel. And, don’t worry about
harsh environments Standard Features
Optional Capabilities
Key Specifications
Agency Approvals
|
The
Partlow MRC 5000 Circular Chart Recorders were designed with
simplicity and functionality in mind. Its operation is so
easy that all of its instructions fit on one 4” X 6”
card. It comes in two basic versions for trend recording–one
or two pens. 