APG PG5 Digital Pressure Gauge

APG, PG5, Digital, Pressure, GaugeAPG PG5 Digital Pressure Gauge is a battery powered digital pressure gauge with five digit display. The APG PG5 Digital Pressure Gauge incorporates an allstainless steel sensor. The sensor is resistant to most typical exposures of vibration and shock. The APG PG5 Digital Pressure Gauge is also less sensitive to the effects of pulsating pressures, a major advantage when compared to vibration sensitive dial gauges. Available options include 4-20 mA two wire, 0-2 VDC, and 0-5 VDC outputs.

Digital Pressure Gauge for Indoor Use

  • Available ranges from vacuum up to 10,000 psi
  • Tare, Max/Min Reading, and Peak-Hold functions
  • Selectable units of measure
  • Variety of process connections available
  • Up to ±0.1% full scale accuracy with NIST certification on selected ranges
  • Analog output options: 4-20 mA (loop powered), 0-2 VDC, 0-5 VDC
  • Cleaned for oxygen service available

Specifications:

Performance
     Standard Pressure Ranges
        Compound Gauge: From vac up to 500 psi, 30 psi minimum
        Gauge: From 0 to 500 psi
        Sealed Gauge: Greater than 500 psi, up to 10000 psi
        Absolute: From 0 to 5000 psi
     Overpressure: 2x full scale
     Accuracy (linearity & hysteresis): ±0.25% of full scale (B.F.S.L.) or 2 digital counts, whichever is greater
Stability – One Year Zero Drift: < ±1% F.S.
     Thermal Zero Shift: ±0.02% F.S./°F
     Thermal Sensitivity Shift: ±0.02% F.S./°F
     Life: 10 million cycles minimum
Environmental
     Compensated Temp: 20 to 130°F (-7 to 54°C)
     Storage Temp: -40 to 160°F (-40 to 71°C)
     Operating Temp: 0 to 160°F (-18 to 71°C)
Electrical
      Batteries: Standard 9 V (1), user replaceable (2-year life typical with 16 min. auto off)
      External Power: 9-28 VDC
      Display Type: 5 digit LCD, 0.4 in. digits
      Display Resolution: 1 part in 10000
      Low Battery Detection: Battery level indicator with 25% increments
      Adjustments: Auto Zero, Tare
      Auto-Off: Menu selectable 2, 4, 8, 16, 32 minutes (not available with options L1, L3 or L4)
Physical
      Weight: 0.36 lb.
     Construction Materials
        Case: Injection molded case material EMI-X® PDX-W-88341
        Wetted Materials: 15-5 SS: >5000 psi; 316L SS: Up to 10,000 psi
     Process Cavity Volume: 0.073 in. typical

Applications:

Line pressure
Vessel pressure
Force measurement

Accessories                                                                                    Part Number
6-pin circular mating connector (E1)                                                      509110

6-pin circular mating connector (E1) with cable                                  509110-X0YY*
*X specify output: L1=1, L3 = 2
*YY specify 2, 10, 25 or 50 ft.
*Example: 509110-1025 is a 4/20 mA output with 25 ft. cable

Panel mount flange (rear port only)                                                      512598

AC to DC external power supply                                                             511641
(includes E2 mating connector)

Rubber boot                                                                                              51262

Downloads:

PG5 Series Datasheet
PG5 Series Manual


Site Design - Panther Marketing & Design