APG PT-400 Series Pressure Transducers for Hazardous Areas

APG, PT-400, Series, Pressure, Transducers, Hazardous, AreasThe APG PT-400 Series of pressure transducers offers pressure ranges from 0 up to 20,000 psi, all stainless steel construction, high burst pressure and high accuracy of ±0.25% F.S. (B.F.S.L.). The sensor consists of a Wheatstone bridge configuration mounted on a single piece, welded stainless steel pressure fitting. The highly accurate sensor and electronics are packaged in a stainless steel housing for use in most environments, yet still provide access to zero and span adjustments.

Applications

These APG PT-400 Series of pressure transducers are the economical answer for all applications requiring high accuracy and reliability over a wide range of pressures. The unit’s small size, integrated electronics, wide operating temperature range (-40 to 180°F), exceptional reliability, durability, and long life, make them the perfect instrument for most static and dynamic pressure measurements where an amplified output signal is desired.

Amplified Output Pressure Transducer for Hazardous Areas

  • Available ranges from 0 to 20,000 psi

  • Available analog outputs: 4-20 mA, 0-5 V, or 0-10 V

  • Zero and Span adjustments

  • Hazardous area approvals

  • Numerous process fittings available

  • High overpressure tolerance (2X full scale)

  • NIST certification available

Specicications

Performance
     Standard Pressure Ranges
        Gauge: From 0 to 1,000 psi
        Sealed: From 100 to 20,000 psi
        Absolute: From 0 to 20,000 psi
     Overpressure: 2x full scale
     Burst Pressure: 3x full scale or limit of process connection (whichever is less)
     Accuracy (linearity & hysteresis): ± 0.25% of full scale (B.F.S.L.)
Stability - One Year Zero Drift: < ±0.5% F.S.
     Zero Balance Adjust: ±5% of full scale
     Span Adjust: ±5%
     Life: 10 million cycles minimum
Environmental
     Standard Compensated Temp: 0 to 130°F (-17 to 54°C)
     Extended Compensated Temp (Optional): -40 to 180°F (-40 to 82°C)
     Storage Temp: -40 to 180°F (-40 to 82°C)
     Operating Temp: -40 to 180°F (-40 to 82°C)
     Humidity: 0 to 90% relative
Physical
     Weight: 10 oz. (283 g) typical
     Wetted Materials: 17-4 SS, 316L SS
     Media: Compatible with 17-4 SS, 316L SS
     Process Cavity Volume: 0.0353 in.
Hazardous Location Approvals: CSA/cCSAus Contract #237484
     0-5 VDC, 0-10 VDC, 4-20 mA
IS: Class I, Division 2; Groups C & D; Ex nL IIB T4
Class I, Zone 2; AEx nL IIB T4
Ambient: -40 to 85°C
     4/20 mA
IS: Class I, Division 1; Groups C & D; Ex ia IIB T4
Class I, Zone 0; AEx ia IIB T4
Ambient:-40 to 85°C

Accessories

                                                                                                 Part Number
4-pin bayonet mating connector (E3)                                              509010

4-pin bayonet mating connector (E3) with cable                              509010-10XX*
(*Specify 2, 5, 10, 10, 25 or 50 ft.)

6-pin bayonet mating connector (E17)                                            509165

6-pin bayonet mating connector (E17) with cable                            509165-10XX*
(*Specify 2, 5, 10, 25 or 50 ft.)

4 pin M12 mating connector (E4) with cable                                     135407-000X*
(*Specify 2 or 5 m)

Downloads


Site Design - Panther Marketing & Design